Technocraft Structure
Brijlalpura, Jaipur, Rajasthan
Send SMS
Send E-mail
|
| PROPERTY | TRADITIONAL BRICK MASONRY BOUNDARY WALL | PRE STRESS PRE CAST BOUNDARY WALL (PSPC BW) | REMARKS |
| Strength | The weakest part of this wall is its 150 mm thick brick masonry which can be easily broken by ordinary hand tools for theft. | PSPC panels consist of high tensile wire at every 75 mm distance and can cut only by mechanical means. | PSPC BW Provides more better security for inductrial campus |
| Re-use | Can not be re used as entire construction is of permanent type | Almost 100% panels and 60% columns can be reused. | PSPC BW save lots of money |
| Durability | Less as its depends on the quality of plaster and that depends upon several factors like plaster, its thickness, quality of sand, quality of curing, workmanship etc.... | Very high as PSPC panels are made of void less dense high grade concrete and has smooth concrete surface | PSPC BW has almost nil maintenance cost. |
| Construction Time | 100 meter wall requires at least 7 days to construct and another 7 days for water curing, | 100 meter wall can be constructed in only 2 days. | PSPC BW save precious construction time |
| Paint | Painfing is must as plastered surface is susceptible to weather decay | Painting is optional and can only for decorative purpose | PSPC BW save painting cost |
| Repair ability | In case of over turning failure a large section of BW may damage and require almost new construction as repair and require several weeks fime to repair | In case of failure only few columns may get damaged and require to be replaced. Almost all the panels can be reused in repair in negligible time. | PSPC BW has almost NIL repair cost and fast work ability. |
| Weathering effect | As plaster surface adsorbs moisture, resulting cracks and peels off. It requires periodically re plaster the boundary wall. | There is almost nil moisture absorption as panel surfaces are made of dense concrete and requires no maintenance. | PSPC BW has almost nil maintenance cost. |
| Cleaning | Moisture absorbed in plastered surface attracts dust, fungus, algid plants etc, requires periodically cleaning and re-painting. | No special cleaning required, only washing can make your BW new again. | PSPC BW save deaning cost |
| Weight | Approximate 600 kg/RMT | Approximate 205kg/RMT | PSPC BW require small foundations |
| Cost | Approximate More than PSPC Boundary Wall | Approximate Less than Tradifional Boundary Wall | PSPC BW Saves cost also |